Attribute | 480041H0 | 480041H1 |
---|---|---|
Electrical data | ||
Max. switching voltage at safety output | 30 V DC | |
Max. switching voltage at control output | 30 V DC | |
Max. switching current at safety output | 1.6 A | |
Max. switching current at control output | 0.15 A | |
Max. switching current for all channels | 3.2 A | |
Number of electronic safety outputs | 4 | |
Number of electronic control outputs | 2 | |
Number of safety inputs | 4 | |
EDM/start input | yes | |
Start function | manual/automatic | |
Start-up test present | yes | |
Operating voltage min. | 20.4 V DC | |
Operating voltage max. | 26.4 V DC | |
Fuse operating voltage | 4A fast | |
Power consumption | 1.8 W | |
Short-circuit detection | yes | |
LED display | two-coloured | |
Input capacitance (CIN) | 10 nF | |
Input resistance (RIN) | 7200 Ohm | |
Power-on time tE | 70 ms | |
Power-off time tA | 70 ms | |
Frequency range | 0,5 - 99 Hz | 0,1 - 9,9 Hz |
Cut-off frequency fg | 2 kHz | |
Frequency change | 21 kHz/s | |
Overvoltage category | III | |
Stabilised PELV/SELV power supply | required | |
Min. switching voltage at safety output | 18.4 V DC | |
Min. switching voltage at control output | 18.4 V DC | |
Readiness delay (tv) | 5000 ms | |
Load resistance max. | 100 Ohm | |
Load capacitance (CL) | 500 nF | |
Response time tan1, min. | 8 ms | |
Response time tan1, max. | 12 ms | |
Safety-related characteristics | ||
PL acc. to EN ISO 13849-1 | e | |
SIL acc. to IEC 61508 | 3 | |
SIL CL acc. to IEC 62061 | 3 | |
PFHD according to IEC 61508 | 5 x 10-9 1/h | |
Operating life | 20 Tm | |
DC | 90% <= dc="">< 99%="" (medium)="" %=""> | – |
Structure acc. to EN ISO 13849-1 | Two-channel | |
Properties | ||
Resp. time tAN for standstill frequency with duty cycle 1:1 min | 1 / fst | |
Resp.tima tAN for standstill frequency with duty cycle 1:1 max | 1,8 / fst | |
Resp. time tAN for standstill frequency with duty cycle 3:2 min | 1 / fst | |
Resp. time tAN for standstill frequency with duty cycle 3:2 max | 1,6 / fst | |